EC300 Models
Model PM-AENG Analogue Engine Module
Model PM-AENG is the engine analogue module. If any analogue modules are used in the EC300 system, this must be the first one. There can be only one PM-AENG in each EC300 system. Additional analogue channels may be connected using the analogue bus on the PM-AENG module and PM-AS08 Analogue Slave modules. The PM-AGEN module is designed for AC metering on a generator set.
FEATURES
- Designed specifically to provide an interface to analogue engine sensors
- 8 analogue input channels
- 1 20 pin connector for connecting other I/O modules
- 1 20 pin connector for connecting other analogue slave modules
EASY TO USE
- Simply snap in place and connect required inputs and outputs
VERSATILE
- Easily configured to suit a wide variety of applications
MODULAR
- All modules in the PM system are the same size. They may be physically arranged in the enclsure to suit the application
ANALOGUE INPUT
- Battery voltage input 0 – 40 VDC
- Oil pressure transducer input 0 – 0.1 VDC
- Engine temperature transducer input 0 – 150 degrees C
- Three spare temperature transducer inputs -50 to 100 degrees C
- Two spare channels 0 – 5 VDC
- Input impedance is 20 Kohms
- Maximum common mode voltage is 15 VDC
POWER SUPPLY
- Power required is 12 VDC or 24 VDC.
MODULE CONSTRUCTION
- Each module is 3.2″W x 12″L
- Mounting is by means of an extrusion moulded plastic track. No tools are required to install or remove